通过代码分析YAM为何蒸发数亿美元

巴比特 阅读 45947 2020-8-14 11:13
分享至
微信扫一扫,打开网页后点击屏幕右上角分享按钮

前言

通过代码分析YAM为何蒸发数亿美元

据链闻消息,2020 年 8 月 13 日,知名以太坊 DeFi 项目 YAM 官方通过 Twitter 发文表明发现合约中存在漏洞,24 小时内价格暴跌 99% 。慢雾安全团队在收到情报后快速进行了相关的跟进及分析,以下是详细的技术细节。

发生了什么?

通过代码分析YAM为何蒸发数亿美元

以上是 YAM 官方对本次事件的简短说明(来源:https://medium.com/@yamfinance/save-yam-245598d81cec)。

简单来说就是官方在合约中发现负责调整供应量的函数发生了问题,这个问题导致多余的 YAM 代币放进了 YAM 的 reserves 合约中,并且如果不修正这个问题,将会导致 YAM 的后续治理变为不可能。同时,官方给出了此次漏洞的具体问题代码,如下:

通过代码分析YAM为何蒸发数亿美元

从上图可知,由于编码不规范,YAM 合约在调整 totalSupply 的时候,本应将最后的结果除以 BASE 变量,但是在实际开发过程中却忽略了,导致 totoalSupply 计算不正确,比原来的值要大 10^18 倍。但是代币供应量问题和治理是怎么扯上关系呢?这需要我们针对代码做进一步的分析。

YAM 会变成怎样?

为了深入了解此次漏洞造成的影响,需要对 YAM 项目代码进行深入的了解。根据官方给出的问题代码及项目 Github 地址(https://github.com/yam-finance/yam-protocol),可以定位出调整供应量的 rebase 函数位于 YAMDelegator.sol 合约中,具体代码如下:

function rebase(         uint256 epoch,         uint256 indexDelta,         bool positive     )         external         returns (uint256)     {         epoch; indexDelta; positive;         delegateAndReturn();     }

通过跟踪 rebase 函数,发现 rebase 函数最终调用了 delegateAndReturn 函数,代码如下:

function delegateAndReturn() private returns (bytes memory) {        (bool success, ) = implementation.delegatecall(msg.data);assembly {            let free_mem_ptr := mload(0x40)            returndatacopy(free_mem_ptr, 0, returndatasize)            switch success            case 0 { revert(free_mem_ptr, returndatasize) }            default { return(free_mem_ptr, returndatasize) }        }    }

通过分析代码,可以发现 delegateAndReturn 函数最终使用 delegatecall 的方式调用了 implementation 地址中的逻辑,也就是说,这是一个可升级的合约模型。而真正的rebase 逻辑位于 YAM.sol 中, 继续跟进 rebase 函数的具体逻辑,如下:

function rebase(        uint256 epoch,        uint256 indexDelta,        bool positive    )        external        onlyRebaser        returns (uint256)    {        if (indexDelta == 0) {          emit Rebase(epoch, yamsScalingFactor, yamsScalingFactor);          return totalSupply;        }uint256 prevYamsScalingFactor = yamsScalingFactor;        if (!positive) {           yamsScalingFactor = yamsScalingFactor.mul(BASE.sub(indexDelta)).div(BASE);        } else {            uint256 newScalingFactor = yamsScalingFactor.mul(BASE.add(indexDelta)).div(BASE);            if (newScalingFactor < _maxScalingFactor()) {                yamsScalingFactor = newScalingFactor;            } else {              yamsScalingFactor = _maxScalingFactor();            }        }        //SlowMist// 问题代码        totalSupply = initSupply.mul(yamsScalingFactor);        emit Rebase(epoch, prevYamsScalingFactor, yamsScalingFactor);        return totalSupply;    } }

通过分析最终的 rebase 函数的逻辑,不难发现代码中根据 yamsScalingFactor 来对 totalSupply 进行调整,由于 yamsScalingFactor 是一个高精度的值,在调整完成后应当除以 BASE 来去除计算过程中的精度,获得正确的值。但是项目方在对 totalSupply 进行调整时,竟忘记了对计算结果进行调整,导致了 totalSupply 意外变大,计算出错误的结果。

分析到这里还没结束,要将漏洞和社区治理关联起来,需要对代码进行进一步的分析。通过观察 rebase 函数的修饰器,不难发现此处限定了只能是 rebaser 进行调用。而 rebaser 是 YAM 中用与实现供应量相关逻辑的合约,也就是说,是 rebaser 合约最终调用了 YAM.sol 合约中的 rebase 函数。通过跟踪相关代码,发现 rebaser 合约中对应供应量调整的逻辑为 rebase 函数,代码如下:

function rebase()        public    {        // EOA only        require(msg.sender == tx.origin);        // ensure rebasing at correct time        _inRebaseWindow();// This comparison also ensures there is no reentrancy.        require(lastRebaseTimestampSec.add(minRebaseTimeIntervalSec) < now);// Snap the rebase time to the start of this window.        lastRebaseTimestampSec = now.sub(            now.mod(minRebaseTimeIntervalSec)).add(rebaseWindowOffsetSec);epoch = epoch.add(1);// get twap from uniswap v2;        uint256 exchangeRate = getTWAP();// calculates % change to supply        (uint256 offPegPerc, bool positive) = computeOffPegPerc(exchangeRate);uint256 indexDelta = offPegPerc;// Apply the Dampening factor.        indexDelta = indexDelta.div(rebaseLag);YAMTokenInterface yam = YAMTokenInterface(yamAddress);if (positive) {            require(yam.yamsScalingFactor().mul(uint256(10**18).add(indexDelta)).div(10**18) < yam.maxScalingFactor(), "new scaling factor will be too big");        }//SlowMist// 取当前 YAM 代币的供应量        uint256 currSupply = yam.totalSupply();uint256 mintAmount;        // reduce indexDelta to account for minting        //SlowMist// 计算要调整的供应量        if (positive) {            uint256 mintPerc = indexDelta.mul(rebaseMintPerc).div(10**18);            indexDelta = indexDelta.sub(mintPerc);            mintAmount = currSupply.mul(mintPerc).div(10**18);        }// rebase        //SlowMist// 调用 YAM 的rebase 逻辑        uint256 supplyAfterRebase = yam.rebase(epoch, indexDelta, positive);        assert(yam.yamsScalingFactor() <= yam.maxScalingFactor());        // perform actions after rebase        //SlowMist// 进入调整逻辑        afterRebase(mintAmount, offPegPerc);    }

通过分析代码,可以发现函数在进行了一系列的检查后,首先获取了当前 YAM 的供应量,计算此次的铸币数量,然后再调用 YAM.sol 中的 rebase 函数对 totalSupply 进行调整,也就是说 rebase 过后的对 totalSupply 的影响要在下一次调用 rebaser 合约的rebase 函数才会生效。最后 rebase 函数调用了 afterRebase 函数。我们继续跟进 afterRebase 函数中的代码:

function afterRebase(        uint256 mintAmount,        uint256 offPegPerc    )        internal    {        // update Uniswap        UniswapPair(uniswap_pair).sync();        //SlowMist// 通过 uniswap 购买 yCRV 代币        if (mintAmount > 0) {            buyReserveAndTransfer(                mintAmount,                offPegPerc            );        }        // call any extra functions        //SlowMist// 社区管理调用        for (uint i = 0; i < transactions.length; i++) {            Transaction storage t = transactions[i];            if (t.enabled) {                bool result =                    externalCall(t.destination, t.data);                if (!result) {                    emit TransactionFailed(t.destination, i, t.data);                    revert("Transaction Failed");                }            }        }    }

通过分析发现, afterRebase 函数主要的逻辑在 buyReserveAndTransfer 函数中,此函数用于将增发出来的代币的一部分用于到 Uniswap 中购买 yCRV 代币。跟踪 buyReserveAndTransfer 函数,代码如下:

function buyReserveAndTransfer(        uint256 mintAmount,        uint256 offPegPerc    )        internal    {        UniswapPair pair = UniswapPair(uniswap_pair);YAMTokenInterface yam = YAMTokenInterface(yamAddress);// get reserves        (uint256 token0Reserves, uint256 token1Reserves, ) = pair.getReserves();// check if protocol has excess yam in the reserve        uint256 excess = yam.balanceOf(reservesContract);//SlowMist// 计算用于 Uniswap 中兑换的 YAM 数量        uint256 tokens_to_max_slippage = uniswapMaxSlippage(token0Reserves, token1Reserves, offPegPerc);UniVars memory uniVars = UniVars({          yamsToUni: tokens_to_max_slippage, // how many yams uniswap needs          amountFromReserves: excess, // how much of yamsToUni comes from reserves          mintToReserves: 0 // how much yams protocol mints to reserves        });// tries to sell all mint + excess        // falls back to selling some of mint and all of excess        // if all else fails, sells portion of excess        // upon pair.swap, `uniswapV2Call` is called by the uniswap pair contract        if (isToken0) {            if (tokens_to_max_slippage > mintAmount.add(excess)) {                // we already have performed a safemath check on mintAmount+excess                // so we dont need to continue using it in this code path// can handle selling all of reserves and mint                uint256 buyTokens = getAmountOut(mintAmount + excess, token0Reserves, token1Reserves);                uniVars.yamsToUni = mintAmount + excess;                uniVars.amountFromReserves = excess;                // call swap using entire mint amount and excess; mint 0 to reserves                pair.swap(0, buyTokens, address(this), abi.encode(uniVars));            } else {                if (tokens_to_max_slippage > excess) {                    // uniswap can handle entire reserves                    uint256 buyTokens = getAmountOut(tokens_to_max_slippage, token0Reserves, token1Reserves);// swap up to slippage limit, taking entire yam reserves, and minting part of total                    //SlowMist// 将多余代币铸给 reserves 合约                    uniVars.mintToReserves = mintAmount.sub((tokens_to_max_slippage - excess));                    //SlowMist// Uniswap代币交换                    pair.swap(0, buyTokens, address(this), abi.encode(uniVars));                } else {                    // uniswap cant handle all of excess                    uint256 buyTokens = getAmountOut(tokens_to_max_slippage, token0Reserves, token1Reserves);                    uniVars.amountFromReserves = tokens_to_max_slippage;                    uniVars.mintToReserves = mintAmount;                    // swap up to slippage limit, taking excess - remainingExcess from reserves, and minting full amount                    // to reserves                    pair.swap(0, buyTokens, address(this), abi.encode(uniVars));                }            }        } else {            if (tokens_to_max_slippage > mintAmount.add(excess)) {                // can handle all of reserves and mint                uint256 buyTokens = getAmountOut(mintAmount + excess, token1Reserves, token0Reserves);                uniVars.yamsToUni = mintAmount + excess;                uniVars.amountFromReserves = excess;                // call swap using entire mint amount and excess; mint 0 to reserves                pair.swap(buyTokens, 0, address(this), abi.encode(uniVars));            } else {                if (tokens_to_max_slippage > excess) {                    // uniswap can handle entire reserves                    uint256 buyTokens = getAmountOut(tokens_to_max_slippage, token1Reserves, token0Reserves);                    // swap up to slippage limit, taking entire yam reserves, and minting part of total                    //SlowMist// 增发的多余的代币给 reserves 合约                    uniVars.mintToReserves = mintAmount.sub( (tokens_to_max_slippage - excess));                    // swap up to slippage limit, taking entire yam reserves, and minting part of total                    //Slowist// 在 uniswap 中进行兑换,并最终调用 rebase 合约的 uniswapV2Call 函数                    pair.swap(buyTokens, 0, address(this), abi.encode(uniVars));                } else {                    // uniswap cant handle all of excess                    uint256 buyTokens = getAmountOut(tokens_to_max_slippage, token1Reserves, token0Reserves);                    uniVars.amountFromReserves = tokens_to_max_slippage;                    uniVars.mintToReserves = mintAmount;                    // swap up to slippage limit, taking excess - remainingExcess from reserves, and minting full amount                    // to reserves                    pair.swap(buyTokens, 0, address(this), abi.encode(uniVars));                }            }        }    }

通过对代码分析,buyReserveAndTransfer 首先会计算在 Uniswap 中用于兑换 yCRV 的 YAM 的数量,如果该数量少于 YAM 的铸币数量,则会将多余的增发的 YAM 币给 reserves 合约,这一步是通过 Uniswap 合约调用 rebase 合约的 uniswapV2Call 函数实现的,具体的代码如下:

function uniswapV2Call(        address sender,        uint256 amount0,        uint256 amount1,        bytes memory data    )        public    {        // enforce that it is coming from uniswap        require(msg.sender == uniswap_pair, "bad msg.sender");        // enforce that this contract called uniswap        require(sender == address(this), "bad origin");        (UniVars memory uniVars) = abi.decode(data, (UniVars));YAMTokenInterface yam = YAMTokenInterface(yamAddress);if (uniVars.amountFromReserves > 0) {            // transfer from reserves and mint to uniswap            yam.transferFrom(reservesContract, uniswap_pair, uniVars.amountFromReserves);            if (uniVars.amountFromReserves < uniVars.yamsToUni) {                 // if the amount from reserves > yamsToUni, we have fully paid for the yCRV tokens                // thus this number would be 0 so no need to mint                yam.mint(uniswap_pair, uniVars.yamsToUni.sub(uniVars.amountFromReserves));            }        } else {            // mint to uniswap            yam.mint(uniswap_pair, uniVars.yamsToUni);        }// mint unsold to mintAmount        //SlowMist// 将多余的 YAM 代币分发给 reserves 合约        if (uniVars.mintToReserves > 0) {            yam.mint(reservesContract, uniVars.mintToReserves);        }        // transfer reserve token to reserves        if (isToken0) {            SafeERC20.safeTransfer(IERC20(reserveToken), reservesContract, amount1);            emit TreasuryIncreased(amount1, uniVars.yamsToUni, uniVars.amountFromReserves, uniVars.mintToReserves);        } else {            SafeERC20.safeTransfer(IERC20(reserveToken), reservesContract, amount0);            emit TreasuryIncreased(amount0, uniVars.yamsToUni, uniVars.amountFromReserves, uniVars.mintToReserves);        }    }

分析到这里,一个完整的 rebase 流程就完成了,你可能看得很懵,我们用简单的流程图简化下:

通过代码分析YAM为何蒸发数亿美元

也就是说,每次的 rebase,如果有多余的 YAM 代币,这些代币将会流到 reserves 合约中,那这和社区治理的关系是什么呢?

通过分析项目代码,发现治理相关的逻辑在 YAMGovernorAlpha.sol 中,其中发起提案的函数为 propose,具体代码如下:

function propose(        address[] memory targets,        uint[] memory values,        string[] memory signatures,        bytes[] memory calldatas,        string memory description    )        public        returns (uint256)    {   //SlowMist// 校验提案发起者的票数占比        require(yam.getPriorVotes(msg.sender, sub256(block.number, 1)) > proposalThreshold(), "GovernorAlpha::propose: proposer votes below proposal threshold");        require(targets.length == values.length && targets.length == signatures.length && targets.length == calldatas.length, "GovernorAlpha::propose: proposal function information arity mismatch");        require(targets.length != 0, "GovernorAlpha::propose: must provide actions");        require(targets.length <= proposalMaxOperations(), "GovernorAlpha::propose: too many actions");uint256 latestProposalId = latestProposalIds[msg.sender];        if (latestProposalId != 0) {          ProposalState proposersLatestProposalState = state(latestProposalId);          require(proposersLatestProposalState != ProposalState.Active, "GovernorAlpha::propose: one live proposal per proposer, found an already active proposal");          require(proposersLatestProposalState != ProposalState.Pending, "GovernorAlpha::propose: one live proposal per proposer, found an already pending proposal");        }uint256 startBlock = add256(block.number, votingDelay());        uint256 endBlock = add256(startBlock, votingPeriod());proposalCount++;        Proposal memory newProposal = Proposal({            id: proposalCount,            proposer: msg.sender,            eta: 0,            targets: targets,            values: values,            signatures: signatures,            calldatas: calldatas,            startBlock: startBlock,            endBlock: endBlock,            forVotes: 0,            againstVotes: 0,            canceled: false,            executed: false        });proposals[newProposal.id] = newProposal;        latestProposalIds[newProposal.proposer] = newProposal.id;        emit ProposalCreated(            newProposal.id,            msg.sender,            targets,            values,            signatures,            calldatas,            startBlock,            endBlock,            description        );        return newProposal.id;    }

通过分析代码,可以发现在发起提案时,需要提案发起人拥有一定额度的票权利,这个值必须大于 proposalThreshold 计算得来的值,具体代码如下:

function proposalThreshold() public view returns (uint256) {    return SafeMath.div(yam.initSupply(), 100); } // 1% of YAM

也就是说提案发起人的票权必须大于 initSupply 的 1% 才能发起提案。那 initSupply 受什么影响呢?答案是 YAM 代币的 mint 函数,代码如下:

function mint(address to, uint256 amount)        external        onlyMinter        returns (bool)    {        _mint(to, amount);        return true;    }function _mint(address to, uint256 amount)        internal    {      // increase totalSupply      totalSupply = totalSupply.add(amount);// get underlying value      uint256 yamValue = amount.mul(internalDecimals).div(yamsScalingFactor);// increase initSupply      initSupply = initSupply.add(yamValue);// make sure the mint didnt push maxScalingFactor too low      require(yamsScalingFactor <= _maxScalingFactor(), "max scaling factor too low");// add balance      _yamBalances[to] = _yamBalances[to].add(yamValue);      // add delegates to the minter      _moveDelegates(address(0), _delegates[to], yamValue);      emit Mint(to, amount);    }

从代码可知,mint 函数在每次铸币时都会更新 initSupply 的值,而这个值是根据 amount 的值来计算的,也就是铸币的数量。

现在,我们已经分析完所有的流程了,剩下的就是把所有的分析串起来,看看这次的漏洞对 YAM 产生了什么影响,对上文的流程图做拓展,变成下面这样:

通过代码分析YAM为何蒸发数亿美元

整个事件的分析如上图,由于 rebase 的时候取的是上一次的 totalSupply 的值,所以计算错误的 totalSupply 的值并不会立即通过 mint 作用到 initSupply 上,所以在下一次rebase 前,社区仍有机会挽回这个错误,减少损失。但是一旦下一次 rebase 执行,整个失误将会变得无法挽回。

通过查询 Etherscan 上 YAM 代币合约的相关信息,可以看到 totalSupply 已经到了一个非常大的值,而 initSupply 还未受到影响。

通过代码分析YAM为何蒸发数亿美元

通过代码分析YAM为何蒸发数亿美元

前车之鉴

这次事件中官方已经给出了具体的修复方案,这里不再赘述。这次的事件充分暴露了未经审计 DeFi 合约中隐藏的巨大风险,虽然 YAM 开发者已经在 Github 中表明 YAM 合约的很多代码是参考了经过充分审计的 DeFi 项目如 Compound、Ampleforth、Synthetix 及 YEarn/YFI,但是仍无可避免地发生了意料之外的风险。

DeFi 项目 Yam Finance(YAM) 核心开发者 belmore 在推特上表示:“对不起,大家。我失败了。谢谢你们今天的大力支持。我太难过了。”,但是覆水已经难收,在此,慢雾安全团队给出如下建议:

1、由于 DeFi 合约的高度复杂性,任何 DeFi 项目都需在经过专业的安全团队充分审计后再进行上线,降低合约发生意外的风险 。审计可联系慢雾安全团队(team@slowmist.com)

2、项目中去中心化治理应循序渐进,在项目开始阶段,需要设置适当的权限以防发生黑天鹅事件。

本文来源:慢雾科技

作者 : yudan @ 慢雾安全团队

btcfans公众号

微信扫描关注公众号,及时掌握新动向

来源链接:https://www.8btc.com/
免责声明:
2.本文版权归属原作所有,仅代表作者本人观点,不代表比特范的观点或立场
2.本文版权归属原作所有,仅代表作者本人观点,不代表比特范的观点或立场
标签: DeFi YAM
上一篇:暴涨的LINK究竟还有多少可以想象的空间? 下一篇:以太坊2.0重新带火“代币质押”?

相关资讯